With leaky faucets, you aren’t only playing truant with the environment around, you actually are inviting catastrophic results and costly affairs ahead. Hence, check for water leak detection using services from reputed plumbers and their teams once in a while, it saves you your night’s sleep.

Causes of leaky faucets

In most water leak detection results, below mentioned would be why we lose sleep over a faucet that decides to act funny. Please read on and be well-informed.

The problematic O ring

The O ring is a small disc attached to the stem screw, which holds on to the faucet’s handle and keeps it from moving. Here is where the dripping can happen, especially when the O ring gets worn out or loose. When the O ring is replaced on time, the leaking would stop.

Valve seat corrosion

This is a spot between the spout and faucet which helps with compression.   Water sediments when accumulated here and as seen by leak detection services experts, can cause corrosion. This would cause the faucet to leak over time. It is only with the help of professional plumbers that this area can be cleaned on a regular basis.

Change that washer

Most of the leak detection services experts say that a worn out washer is the number one culprit that makes a faucet redundant. This is because of the continuous use, friction and immense resistance it bears on a day to day basis. The spot is where the fault first starts and the rubber washers wear out over time. When checking for water leak detection, the plumbers would first look for worn out signs of the rubber washer.

Even if the washer isn’t installed properly, you could expect a leaky faucet anytime soon. This is why it is so important to have licensed plumbers from reputed service providers fixing the bathroom fixtures at your homes.

It gets loose

The parts of a faucet, due to continuous use would get loose over time, and this would lead to leaky issues later on. When leak detection is checked for, the plumbers would look for signs near the faucets handle. If they do find signs there, they would get the nut replaced or tightened, depending on the severity of the situation

Seals and worn out ones

Seals for inlet and outlet are important parts of a faucet, and when they are used every day, sediments can accumulate in them, which completely eat the seals out. It is exactly this which makes the faucet a leaky one if not checked and corrected on time. Most plumbers would use duplicate seals to correct the issue, and it is okay if they do that.

Broken plumbing too can cause undue pressure and force a faucet to leak. Water pressure in the pipes can play havoc, and as a layman you wouldn’t know how and when it begins. Hence, always have regular checks done to avoid such issues, and call for leak detection services at least twice a year to be safe.